Good morning! We are back today with another idea for the Twelve Days of Christmas-Wreaths! Here is a link back to the original post where you can see all the other hosts and their ideas! Don’t forget the inlinkz and the giveaway at the end of this post!
I love the coastal look, which most of you know already, so I made a Coastal Buoy for my Christmas Wreath! This will go much better with my decor!
Here are the supplies you will need:
- Green or white foam circle form
- White paint (optional)
- Strips of cotton or muslin fabric
- Mod Podge
- Silver Duct Tape
- White paint and whatever other color you want to use
- Christmas greens, berries, pinecones, ect.
I bought enough supplies to make 2 wreaths, but you only have to buy enough for one. I found these green styrofoam wreath forms at the Dollar Tree. Because they were green, I painted them white first, but if you buy white ones, you can skip this step.
While the wreaths were drying, I cut strips of muslin to wrap around the wreath. I cut them about 1 inch wide, but they don’t have to all be perfect or the same.
I wrapped each strip around the wreath overlapping as I went. When one ended, I overlapped the next one and continued all the way around. Once I got to the end, I used a little bit of hot glue to keep it from coming undone.
I brushed Mod Podge over the whole thing. Since mine will be hanging outside on the door, this will protect it a little bit, plus it looks a little more finished.
When the Mod Podge was dry, I used painters tape to mark off 4 areas. I will be painting 2 areas turquoise and 2 white, so this will keep the paint from going into the other area. I will be covering the taped area later, so it won’t matter that it’s not painted.
I used a turquoise with some sparkle in it since it’s for the holidays.
Next I cut strips of duct tape and then cut each piece in half lengthwise. These pieces I wrapped around the wreath on the unpainted areas.
I found the perfect rope at The Dollar Tree too! I couldn’t believe they had this. It was even called Nautical!
I made some loose loops, 4 of them and then wrapped another piece of rope around the middle, securing it tightly.
I also tied knots at the end of the loose pieces so it wouldn’t fray.
I used a separate piece of rope to go around the outside of the wreath. I loosely wrapped it around the wreath and secured it with duct tape over the other duct tape. I matched up the ends and secured them too.
For the greenery, I used 2 pieces of greens with berries and a small one with the rope pieces. I placed 2 going up and one going down and I tied them together with twine.
I laid the greenery on the back of the wreath and hot glued it in various places until it was secure.
Once they were attached, I placed the rope bow on the inside of the wreath and tied it on with twine too. I also added a twine loop for the back. I hooked it around one of the bent stems.
I took it outside and hung it on my porch! It’s the perfect touch to my coastal home!
I also made one to go inside the house. I can’t wait to find the perfect spot for it!
I love how it turned out and is perfect for my front porch! What do you think? Let me see what wreaths you have made!
Don’t forget about the giveaway!
Thank you for coming by today! Our next post will be a DIY Ornament. See you next time!