Good morning! Are you ready for summer? Do you have projects lined up to work on or are you just taking time to relax? I hope I can do a little of both. I want to thank all of you for showing up each time I post. I really appreciate all of my readers! I know I have been a little hit and miss lately, and I thought summer would be better, but it doesn’t look like it will be. Anyways, thanks for hanging out with me when you can!
I have had this project set aside for awhile and just couldn’t quite figure out how it was all going to work. Even now, I’m not completely satisfied, but it didn’t turn out too bad.
I received gold flatware for Christmas, so I needed place to store it. I had picked up the box at yard sale awhile back and knew it could be perfect. I had some gold polka-dot napkins I had picked up at the .99 Cent Store, some white paint, pretty fabric and some dowels I already had.
I painted the box first. I chose white, of course. I gave it several coats of paint. I decided to try to decoupage the top. I had some white and gold polka-dot napkins and I figured they would go well with the gold flatware. I hadn’t decoupaged before, so my first attempt didn’t go so well. You can see how wrinkly it is. I ended up sanding this off and trying again. The second time, I let the Mod Podge set for a couple of minutes before laying down the napkin, and that worked much better.
After the paint dried, it was time to glue the fabric into the bottom of the box. I measured it out by setting the box on top of the fabric and tracing it out a little larger. I knew I wanted to fold over the fabric to make a clean edge, so I added a little extra fabric.
Once I had the right measurements, I ironed down the edges to make them flat. I had some spray glue, but I think any glue would work. I would brush it on if I used tacky glue. I sprayed the glue onto the bottom of the box and carefully laid the fabric on top of it.
Once the fabric was in, it was time to add the dividers. I used some dowel I had and cut it into 4 pieces which fit snugly inside the box. I put some glue on the ends of the dowels and then placed them where I wanted them to go.
I forgot! I also added some sparkly chipboard letters to the top of the box! I thought ‘SPARKLE’ was appropriate!
I’m so glad to finally have a special place to store my flatware!
It’s even pretty enough to leave out!
Thanks again for coming by today! I will keep on plugging along over here and hope you join in with me!